The Quorn Double Gates are a beautifully crafted pair of solid wooden gates, with thick frames and an open top above a solid lower section, creating an attractive gate for your driveway. The gates are handmade in the UK using smooth planed Scandinavian Redwood which has been pressure treated for a long, maintenance free life. The lower boards are a tongue and groove construction, framed on both sides and across the top. Each gate has two vertical, three horizontal and two diagonal heavy duty braces on the back for maximum strength and durability. The top of these gates are flat with an overall height of 900mm (35½”).

The matching Quorn Single Gate can be used in conjunction with these gates to provide separate pedestrian access to the side of the driveway.

It is recommended that wooden gate posts are used when installing these gates. Optional smooth sawn pressure treated 10cm x 10cm square posts are available.

An optional galvanised fittings pack that includes a Ring Latch, 4 x 18 inch Hook & Band Hinges and an 18 inch Drop Bolt is also available.

The Quorn Double Gates are available in the following sizes:

*Please note that the Gate Width refers to the total width of the pair of gates, not each gate.

See size chart below to calculate how much space you will require to install your gate when using our 10cm (4") square gate posts.

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

View Made to Measure

Information about your gate

Fittings. The Quorn gates are not supplied with any fittings; however an optional fittings pack is available which includes a drop bolt plus the correct size hinges and latch for this weight of gate. The fittings we have available are galvanised to prevent rust. Each gate has three horizontal braces on the back. Hinges should be fitted to the top and bottom brace.

Wooden Posts. Posts should be dug in approximately 45cm deep and held in place with concrete, or bolted to the wallusing masonry bolts or frame fixing screws. A small gap must be left between the post and the gate to allow for expansion of the wood.

Finish. The Quorn gates are supplied pressure treated which leaves the wood with a temporary green tint. If left to weather, the wood will fade to a silvery grey colour; however you can change the colour straight away by staining the wood using Protek Timber Eco Shield, or it can be painted after it has been allowed to weather for at least 3 months using a product compatible for use with pressure treated timber. 

Specification

Warranty

Our timber gates come with a 5-year workmanship guarantee, covering the integrity of the joints and protection against rot. While pressure treatment can offer long-term resistance to rot, wood is a natural material that expands and contracts with changes in temperature and humidity. Slight twisting may occur due to uneven sunlight exposure but is not considered a fault unless extreme, as it often corrects itself over time. To minimize movement, ensure even sun exposure and secure the gate with locks at both the top and bottom. Any modifications or damage exposing untreated wood will void the guarantee.